Replacement Pressure Gauge 0-60 Psi
R0.00
A replacement low pressure gauge for Micro Matic regulators. To prevent damage in future, look at buying the protective bracket, MM0051.
SKU: MM0041
Categories: Drinks & Beer Dispensing, Gas Regulators
Our offers
Another quality product from Micro Matic.
Available accessories:
High Pressure Hose to enable wall mounting of the regulator (TOF021 Part Order Number)
Protective Safety Bracket to prevent damage if the cylinder topples over (MM0051)
Add to enquiry
Micromatic Premium Plus Secondary Regulator with wall bracket for wall mounting. This regulator needs to be connected after the primary pressure regulator (see below). The primary cylinder pressure is reduced by the primary regulator to around 5 or 6 bar, which enters the secondary pressure regulator on the left or right hand side. The pressure adjustment and setting on the secondary regulator, is the applied pressure to the keg being supplied by this regulator. It is best practice to always have one secondary regulator for each keg being supplied as splitting or sharing gas supplies can cause over/under pressure which results in beer foaming or flat and lifeless beer. Ask us for the best solution in your application.
This Micromatic Range of primary and secondary regulators is truly a premium product with the following features that differentiate it from the competition:
Add to enquiry - Cartridge for valve system, complete with stainless steel valve
- Tamper evident screw on the pressure adjustment - this lets you know when someone has been adjusting after your technician has installed the regulator.
- Reliable and high performance.
- Brass housing that is Nickel plated.
- Tamper evident ring if someone open the regulator bonnet.
Any regulator installed directly onto a gas cylinder can easily be damaged if the regulator topples over. Damaged gauges and possibly even more detrimental damage can be prevented by installing this protective bracket.
Add to enquiry
Micromatic Premium Plus Primary Regulator with wall bracket for wall mounting. Connection to the CO2/N gas cylinder needs to be made by using a high pressure hose (see below). This method of mounting a regulator protects the regulator from any damage normally caused when a gas cylinder falls or is dropped.
This Micromatic Range of primary and secondary regulators is truly a premium product with the following features that differentiate it from the competition:
Add to enquiry - Cartridge for valve system, complete with stainless steel valve
- Tamper evident screw on the pressure adjustment - this lets you know when someone has been adjusting after your technician has installed the regulator.
- Reliable and high performance.
- Brass housing that is Nickel plated.
- Tamper evident ring if someone open the regulator bonnet.
Related Products
Oetiker Clamps are intended for low pressure applications such as dispensing equipment, industrial machinery, underground irrigation systems & more. Oetiker clamps feature an ear with a 'dimple'. This simple change in design adds strength to the grip of the clamp, and creates a spring-like action which permits the clamps to 'breathe' without loosening.
Add to enquiry
Oetiker Clamps are intended for low pressure applications such as dispensing equipment, industrial machinery, underground irrigation systems & more. Oetiker clamps feature an ear with a 'dimple'. This simple change in design adds strength to the grip of the clamp, and creates a spring-like action which permits the clamps to 'breathe' without loosening.
Add to enquiry
Oetiker Clamps are intended for low pressure applications such as dispensing equipment, industrial machinery, underground irrigation systems & more. Oetiker clamps feature an ear with a 'dimple'. This simple change in design adds strength to the grip of the clamp, and creates a spring-like action which permits the clamps to 'breathe' without loosening.
Add to enquiry